Kamis, 31 Januari 2019

History of Aplication

Overview

1.Mobile communication is so integrated into our lives
that many people feel uncomfortable without a cell
phone.
2.Once upon a time, the most popular functions of phones
were calling and sending texts.
3. A smart phone is a multifunctional device that not only
communicates, but helps to learn, earn, and have fun.
4. This is made possible by the development of mobile
applications.

Overview, cont
1.Mobile applications date back to the end of the twentieth
century.
2.Typically, they were small arcade games, ring tone editors,
calculators, calendars, and so forth.
3.The beginning of the new millennium saw a rapid market
evolution of mobile content and applications.
5.Operating systems for smart phones (Windows Mobile,
Symbian, RIM, Android, Mac iOS), are open to the
development of third-party software, unlike the conventional
programming environment of standard cell phones.

5.Manufacturers tried to make their products more
attractive for customers by introducing more and more
applications.
6.But quality matters as well. Cell phone development
needs to be easy and intuitive. Every company tries to
facilitate the process of development so that users are
able to customize their devices.
7.Motivation: Juniper Research estimates in 2014 the
direct and indirect revenues from sales of mobile
applications will total 25 billion dollars.

So, to conclude:
1.Mobile users demand more choice, more opportunities
to customize their phones, and more functionality
2. Mobile operators want to provide value-added content
to their subscribers in a manageable and lucrative way.
3.Mobile developers want the freedom to develop the
powerful mobile applications users demand without
restrictions.
4.Finally, handset manufacturers want a stable, secure,
and affordable platform to power their devices.

Remember the Brick?
1.The Motorola DynaTAC 8000X was the first commercially
available cell phone.
2.First marketed in 1983, it was 13 x 1.75 x 3.5 inches in
dimension, weighed about 2.5 pounds, and allowed you
to talk for a little more than half an hour.
3. It retailed for $3,995, plus hefty monthly service fees
and per-minute charges.
4.It made calls, and there was a simple contacts
application included in the operating system.

History: the first apps
1.First-generation mobile phones were designed and
developed by the handset manufacturers.
2.Competition was fierce and trade secrets were closely
guarded. They didn’t want to expose the secrets of
their handsets, so they developed the phone software
in-house.
3.Developers that weren’t part of this inner circle had no
opportunity to write applications for the phones.
4.It was during this period the first “time-waster” games
begin to appear.
5.Nokia was famous for putting the 1970s video game
Snake on some of its earliest phones. Other followed,
adding games like Pong, Tetris, and Tic-Tac-Toe.
6.These early phones changed the way people thought
about communication. As mobile phone prices dropped,
batteries improved, reception areas grew, and more and
more people began carrying these handy devices.
7.Soon mobile phones were more than just a novelty.

8.Customers began pushing for more features and more
games.
9. But handset manufacturers didn’t have the motivation
or the resources to build every application users
wanted.
10. They needed some way to provide a portal for
entertainment and information services without
allowing direct access to the handset.
11.What better way to provide these services than the
Internet?

History: We Need WAP
1. It turned out direct phone access to the Internet didn’t scale
well for mobile.
2.By the late 90s, professional Web sites were full color and
loaded with text, images, and other types of media.
3.They relied on JavaScript and Flash to enhance the user
experience and were often designed at 800×600 pixels.
4.Early phones had very small monochrome low-res screens and
limited storage and processing power. They couldn’t handle
the data-intensive operations required by traditional Web
browsers. The bandwidth requirements for data transmission
were also costly to the user.

History: WAP is the answer!
1.The Wireless Application Protocol (WAP) standard was
developed to address these concerns.
2.WAP was a stripped-down version of HTTP, which is the basic
protocol of the World Wide Web.
3.WAP browsers were designed to run within the memory and
bandwidth constraints of the phone.
4. Third-party WAP sites served up pages written in a markup
language called Wireless Markup Language (WML).
5.The pages were much simpler in design than the WWW pages.

6. The WAP solution was great for handset manufacturers.
They could write one WAP browser to ship with the
handset and rely on developers to come up with the
content users wanted.
7. The WAP solution was great for mobile operators. They
could provide a custom WAP portal directing their
subscribers to the content they wanted to provide, and
wallow in the high data charges associated with
browsing.
8. But there was one problem –

9. Developers and content providers didn’t deliver, except
in a limited way.
10. Most of the early WAP sites were extensions of popular
branded Web sites, such as CNN.com and ESPN.com.
Users accessed the news, stock market quotes, and
sports scores on their phones.
11.Some of the most popular commercial WAP applications
that emerged during this time were simple wallpaper
and ring tone catalogues, allowing users to personalize
their phones for the first time.

History: WAP is not the answer!
1. Commercializing WAP applications was difficult, and
there was no built-in billing mechanism.
2. Users browsed a WAP site and requested a specific item,
then filled out a simple order form with their phone
number and the handset model of their phone. It was up
to the content provider to deliver an image or audio file
compatible with the phone.
3.Payment was handled through various premium-priced
delivery mechanisms such as Short Message Service
(SMS), Enhanced Messaging Service (EMS), Multimedia
Messaging Service (MMS), and WAP Push.

4.WAP browsers were slow and frustrating.
5. Typing in long URLs with the numeric keypad was a
tremendous pain.
6.Most WAP sites were one version and did not account for
individual phone specifications. It didn’t matter if the
end-user’s phone had a big color screen or a postage
stamp-sized monochrome one.
7.The developer couldn’t tailor the user’s experience. The
result was a mediocre and not very
compelling
experience for everyone involve

8.WAP fell short of commercial expectations, except in
Japan and a few other places.
9.Small handset screens were too small for surfing.
Reading a sentence fragment at a time and then waiting
seconds for the next segment to download ruined the
user experience, especially because every second of
downloading was charged to the user.
10.Critics began to call WAP “Wait and Pay.”
11. It came as no surprise when users wanted more – they
will always want more.
Proprietary Mobile Platforms
1.Writing graphic-intensive video game applications with
WAP was nearly impossible
2.The kids most likely to personalize their phones with
wallpapers and ring tones looked at their portable
gaming systems and asked for a device that was both a
phone and a gaming device or a phone and a music
player.
3. If devices like Nintendo’s Game Boy could provide hours
of entertainment with only five buttons, why not just
add phone capabilities?

4.Memory was getting cheaper; batteries were getting better;
and PDAs and other embedded devices were beginning to run
compact versions of common operating systems like Linux and
Windows.
5. The traditional desktop application developer was suddenly
involved in the embedded device market, especially with
Smartphone technologies like Windows Mobile, which they
found familiar.
6.Handset manufacturers realized that if they wanted to
continue to sell their products, they needed to change their
protectionist policies regarding handset design and expose
their internal workings to some extent.

7.A variety of different proprietary platforms emerged—
and developers are still actively creating applications
for them.
8. One of the first was the Palm OS (now Garnet OS) and
RIM Blackberry OS. Sun Microsystems popular Java
platform became Java Micro Edition (Java ME).
Qualcomm developed its Binary Runtime Environment
for Wireless (BREW). Symbian OS was developed by
Nokia, Sony Ericsson, Motorola, and Samsung. The Apple
iPhone iOS joined the ranks in 2007. Google’s Android
came along a year later.

Platform Wars

1.Most platforms have associated developer programs that keep
the developer communities small, vetted, and under
contractual agreements on what they can and cannot do.
These programs are often required and developers must pay
for them.
2.Each platform has benefits and drawbacks. The truth is no
one platform has emerged victorious.
3.Some platforms are best suited for commercializing games
and making millions if your company has brand backing. Other
platforms are more open and suitable for the hobbyist.
4.No mobile platform is best suited for all possible applications.

5.The mobile phone market has become increasingly
fragmented, with all platforms sharing part of the pie.
6. For manufacturers and mobile operators, handset
product lines have become complicated fast.
7.Platform market penetration varies greatly by region
and user demographic.
8.Instead of choosing just one platform, manufacturers
and operators have been forced to sell phones for all
the different platforms to compete.

9. The mobile developer community has become as
fragmented as the market.
10. Mobile software developers work with different
programming environments, different tools, and
different programming languages.
11.Porting among the platforms is often costly and not
straightforward. Keeping track of handset configurations
and testing requirements, signing and certification
programs, carrier relationships, and application
marketplaces have become complex spin-off businesses
of their own.

12. What is the Acme Dynamite Company to do when it
wants to develop an app to sell dynamite to coyotes
with a road-runner bloodlust?
13.Acme is forced to choose one or, worse, all of the
above.
14. The eternal question: Proprietary or open-source?
15. In other words, Apple vs. Google.
16. What are the pros and cons?

Thank you.

Selasa, 29 Januari 2019

History and Evolution of Android

Android, Inc. started with a clear mission by its creators. According to Andy Rubin, one of
Android’s founders, Android Inc. was to devdevelopwelop “smarter mobile devices that are more
aware of its owner’s location and preferences.” Rubin further stated, “If people are smart,
that information starts getting aggregated into consumer products.” The year was 2003
and the location was Palo Alto, California. This was the year Android was born.
While Android, Inc. started operations secretly, today the entire world knows
about Android. It is no secret that Android is an operating system (OS) for modern day
smartphones, tablets, and soon-to-be laptops, but what exactly does that mean? What did
Android used to look like? How has it gotten where it is today? All of these questions and
more will be answered in this brief chapter.

Origins

Android first appeared on the technology radar in 2005 when Google, the multibillion-
dollar technology company, purchased Android, Inc. At the time, not much was known
about Android and what Google intended on doing with it. Information was sparse until
2007, when Google announced the world’s first truly open platform for mobile devices.

The First Distribution of Android

On November 5, 2007, a press release from the Open Handset Alliance set the stage for
the future of the Android platform. The alliance stated some of the goals of Android
as, “fostering innovation on mobile devices and giving consumers a far better user
experience than much of what is available on today’s mobile platforms.”

At that time, more than 2 billion mobile phones were used worldwide, compared to
the 4.6 billion used as of 2010. However, there was no coordination of platforms between
the various companies that provided mobile devices. With the introduction of Android,
a single operating system removed the need for reimplementation of phone applications
and middleware. The companies creating new devices could now focus much more
intently on the hardware and underlying components.
But these companies weren’t the only ones who benefited from the launch of
Android; software developers could now release applications to multiple devices with
very few changes to the underlying code base. This allowed developers to spend more
time working on the applications these phones were running and create the rich and
impressive applications that we are all used to. This was in part due to the open source
philosophy behind Android, and the Apache license, which is the license used on most of
the Android source code.

Open Source Apache License

The Apache License is just one of many different licenses that exist in the open source
community. While there are differences in all of these licenses, they all facilitate the same
open source mindset that is best summed up as follows:
“Free software” is a matter of liberty, not price. To understand the concept,
you should think of “free” as in “free speech,” not as in “free beer.”
—Richard M. Stallman
The Apache License specifically grants freedom to use the software for any
purpose, as well as the ability to distribute, modify, or distribute modified versions.
The Apache License is also permissive, meaning that modified versions do not have to
succumb to the Apache License. For more information about the Apache License, go to
http://www.apache.org/licenses/LICENSE-2.0.
What Is Android?
So what exactly is Android? Android OS is the open source technology stack that runs
on over 400 million devices worldwide. This technology stack consists of various
components that allow developers and device manufacturers to work independently.
This can be broken into five primary pieces—applications, application frameworks,
native libraries, Android runtime, and the Linux kernel.

Applications
The applications exist at the highest level. These are the tools that everyone who uses
Android is most familiar with. Android comes with various robust applications that
support everyday phone needs, such as messaging, e-mail, Internet browsing, and
various third-party applications. These applications are primarily written in the Java
programming language. In a recent legal case with Oracle, Google’s Android chief Andy
Rubin explained why he chose Java as the language of use for developers. Rubin’s primary
points were that Java had a well-known brand name and that Java is taught in almost all
universities worldwide.
These applications are distributed through various means, most commonly from
the Google Play Store (formerly Android Marketplace); however, the Android OS also
supports installation of applications over a USB connection and from an SD card.

Application Frameworks
Android provides developers the ability and tools to create extensive, interactive, rich
graphical applications to users, and is targeted to deploy these applications to the
Google Play Store. Developers have access to the same APIs that are used inside of core
applications, as well as access to almost all existing Java libraries. For the development
process of Android applications, consult Chapter 6: Installing the Android SDK for Intel
Application Development.
Native Libraries
The next level is where the road diverges. The native libraries and the Android runtime
exist in roughly the same space. The native libraries are compiled and preinstalled
C/C++ binaries that the Android system depends on. These include all of the libraries in
the green section of Figure 1-1. The following sections contain descriptions of some of the
more prominent native libraries and their functions inside of Android.

Surface Manager

This is often referred to as Android’s Window Manager. Surface Manager is used for
composing what any individual screen will look like. It also does some more subtle things
that help Android run smoothly, such as off-screen buffering and transitions.

SQLite

This is a database used to persist information across sessions of an Android device. On
Android, the SQLite database is stored inside of the device’s internal memory so SD cards
can be interchanged without losing device-specific information.

WebKit

WebKit allows for HTML to be rendered and displayed to Android very quickly and
efficiently. This is the default browser engine in the Android system and is available to
system and third-party applications.

OpenGL/ES

The OpenGL engine processes graphics in Android. OpenGL can render both 2D and 3D
objects on Android. This also supports hardware acceleration on devices with dedicated
graphic chips.
Android Runtime
Inside of the Android runtime are two primary components: the core Java libraries that
Android provides, and the Dalvik virtual machine. The Dalvik virtual machine is Google’s
implementation of Java that is optimized to be used on mobile devices. The more specific
differences within Dalvik are very technical and aren’t covered in this book

Linux Kernel
The last of the layers is the Linux kernel. Android was initially based on the Linux 2.6
kernel, with some optimizations for mobile use. Current versions of Android are based
on the Linux 3.1 kernel. The Linux kernel provides access as close to the hardware as
possible. As a result, drivers are written in the kernel space to operate as fast and as
efficiently as possible. These include things like controlling the internal radios, turning
on the stereo and camera, dealing with power and battery charging, and operating the
physical keyboard or buttons on the device. The Linux kernel, like Android, is an open
source project and is used widely, particularly on servers in enterprise environments.
The Open Handset Alliance
In November 2007, the Open Handset Alliance (OHA) was established by 34 founding
members dedicated to development of open mobile standards, including Google,
mobile device manufacturers, application developers, embedded systems developers,
and commercialization companies. The goal of this alliance as described in the web site
is as follows:
The Open Handset Alliance™, a group of 84 technology and mobile
companies who have come together to accelerate innovation in mobile and
offer consumers a richer, less expensive, and better mobile experience.
As it stands today, OHA has 84 firms who are developing and working on the
consortium’s main and only project to date, Android. Thanks to the services and products
offered by members of the OHA, devices and related services are produced at higher
quality for a lower price.
Android Open Source Project
After the purchase of Android, Inc., the Android Open Source Project (AOSP) was
created and has since been led by Google. The AOSP is in charge of the development and
maintenance of the Android software stack. As stated by Google, the goal of the project is
as follows:
The goal of the Android Open Source Project is to create a successful real-
world product that improves the mobile experience for end users.
Android is designed and maintained with backward capability in mind. This
means that new devices can run applications developed all the way back to Android’s
Cupcake (1.5). Official support for the Android SDK only goes back to Cupcake (1.5),
so applications written for pre-Cupcake devices aren’t guaranteed to run on the latest
Android devices.
Through the course of the AOSP, there have been many different versions of Android
released for mobile devices. When new Android versions are released, mobile device

owners are allowed to choose whether to upgrade their OS. With every iteration of
Android, a new SDK is made available to developers and various new features are added
to supported devices. Software developers need to stay mindful of the legacy features
from previous versions when developing new applications.
Astro (1.0)
Astro is where Android started, released as a beta in November 2007, and released to the
public in September of 2008 on the HTC Dream. Astro showed off various core features
of the Android OS and included many of the apps that Android users now know and love.
These include Android Market, a web browser, e-mail/Gmail, Google Maps, Messaging,
Media Player, YouTube, and various others.
Cupcake (1.5)
Cupcake, released April 30, 2009, was the next major version of Android to hit the
commercial markets. Cupcake was based on the Linux kernel 2.6.27 and included
many new features to users and developers. The major changes were support for virtual
keyboards, support for widgets on the home screen, animations added in various places,
and auto-pairing and stereo support for Bluetooth-capable devices. On a humorous side
note, from Cupcake and onward all Android versions to date have been named after
desserts.
Donut (1.6)
On September 15, 2009, Google released Android version 1.6, named Donut. With Donut
came an updated Linux kernel from 2.6.27 to 2.6.29, as well as some new features and
supported devices. Major features included voice and text search of contacts/web/
bookmarks, support for WVGA screens, and improvements to camera functionality and
speed. Donut was the last version of Android in the 1.x series to be released.
Éclair (2.0/2.1)
Éclair was released October 26, 2009, which continued to be built on the Linux kernel
version 2.6.29. With SDK version 2.0 came many new features and capabilities for
both developers and consumers. Large changes were made to the way that Android
looked and felt on capable devices, including significant speed improvements in many
different applications. The premier device for Android 2.0 was Motorola’s Droid on
Verizon Wireless.
On December 3, 2009, Google updated Android to version 2.0.1 in efforts to fix
some small bugs and update the API for developers. It wasn’t until January 12, 2010
that Android was moved to version 2.1. Similar to the update in December, version 2.1
primarily included updates to the underlying API and bug fixes.

Froyo (2.2.x)
On May 20, 2010, the Android SDK version 2.2 (Froyo) was released with Linux kernel
2.6.32. Google’s Nexus One was the first device on the market to show off Froyo and its
new capabilities. Very significant features were added to Froyo, including Adobe Flash
support, Android Cloud to Device Messaging, Wi-Fi hotspot functionality, and significant
performance optimizations. It’s important to note that the Android SDK recommends
choosing Froyo as your base development version to hit the largest current user base of
Android users.
Three subsequent updates were released for the Android 2.2 SDK: 2.2.1 on January
18, 2011, 2.2.2 on January 22, and 2.2.3 on November 21. These updates were primarily
bug fixes and security updates to Android.
Gingerbread (2.3.x)
Gingerbread was released on the December 6, 2010 and was based on the Linux kernel
2.6.35. Similar to the Froyo release, Google’s Nexus S was introduced to show off
Gingerbread. Features of Gingerbread include support for WXGA and other extra-large
screen sizes, improvements to the virtual keyboard, support for more internal sensors
(namely gyroscopes and barometers), support for multiple and front-facing cameras, and
the ability to read Near Field Communication (NFC) tags.
Five updates were released to Gingerbread, 2.3.3–7, from February to September
of 2011. With these updates came various features, security updates, and bug fixes. One
of the most significant features introduced was Open Accessory support, which lets a
compatible device function as an USB peripheral to compatible software platforms.
Honeycomb (3.x)
In February of 2011, Honeycomb, the first tablet-only Android version, was released on
the Motorola Xoom. Because Honeycomb was created specifically for tablet devices,
Android was tweaked to allow for a more enjoyable experience with larger screen real
estate. This included a redesign of the onscreen keyboard, a system bar to allow for quick
access to notifications and navigation, multiple browser tabs to allow for easier use of the
web, and support for multi-core processors.
Honeycomb has had six updates, two of which were major, through its current life
cycle. The first update was Android SDK version 3.1 on May 10, 2011, and it namely
added support for USB accessories such as keyboards, joysticks, and other human
interface devices (HIDs). The second major SDK update was 3.2 on July 15, 2011. The
most significant feature of 3.2 was compatibility display mode for Android applications
that were not designed for tablets. The last four updates to Honeycomb have been minor
improvements, bug fixes, and security updates.
Ice Cream Sandwich (4.0.x)
Ice Cream Sandwich (ICS) was released on October 19, 2011 and was based on the
Linux kernel 3.0.1. Samsung’s Galaxy Nexus was the device released with ICS as it hit

public markets. ICS was packed with a multitude of features and improvements to the
Android user interface (UI). Some features include a customizable launcher, a tabbed
web browser, facial recognition to unlock the device, a built-in photo editor, hardware
acceleration of the UI, and software buttons originally introduced in 3.x (Honeycomb).
It is important to note that ICS merged version 3.x (Honeycomb) and 2.3.x (Gingerbread)
into a single OS supporting both phones and tablets.
Four minor updates have since been released for ICS devices from November
of 2011 to March of 2012. These updates focused on stability improvements, camera
performance, and bug fixes.
Jelly Bean (4.1.x)
Jelly Bean was released on July 9, 2012 and is based on the Linux kernel 3.1.10. Asus’
Nexus 7 tablet device was the flagship user of Jelly Bean. Jelly Bean released a number of
improvements and performance upgrades to the UI and audio within Android. Version
4.2, released on November 13, 2012 and based on Linux kernel 3.4.0, added accessibility
improvements. Version 4.3 was released on July 24, 2013, and added OpenGL ES 3.0
support for better game graphics, security enhancements, and upgraded digital rights
management APIs. Other features of the Jelly Bean versions include customizable
keyboard layouts, expandable notifications, application-specific notification filtering, and
multichannel audio.
KitKat (4.4.x)
The last version of Android as of this writing, KitKat, was released on September 3, 2013.
Its features included performance optimizations for devices with less RAM, expanded
accessibility APIs, wireless printing capability, and a new experimental runtime virtual
machine, called ART, which may come to replace Dalvik. KitKat debuted on Google’s own
Nexus 5 smartphone on October 31. 2013.
Overview
With all of these versions of Android, the features and changes to the OS have led to a rich
and user-centered experience. The average user, who knows little to nothing about the
technical aspects of the device, can operate the device like it is second nature. Now that
you have acquired more insight into the underlying systems and architectures that make
this possible, the only thing left to ask is, what’s next?

Thank you.

Sabtu, 26 Januari 2019

Computer Terms From A-Z pt.l

Anti-spyware
1. program that helps to block and prevent spyware
and other malware infections on a computer
2. monitor incoming data from email, websites, and
downloads of files and stop spyware programs
from getting a foothold in the computer operating
system (SEE malware, spyware)
Antivirus Program
1. also known as antivirus software
2. software program designed to protect your
computer or network against computer viruses.
If a virus is detected, the computer will display a
warning asking what action should be taken, often
giving the options to remove, ignore, or move the
file
Bandwidth
1. describes network speed. The maximum data
transfer rate of a network or Internet connection
2. measures how much data can be sent over a
specific connection in a given amount of time
EXAMPLES: A gigabyte Ethernet (SEE Ethernet,
gigabyte) connection has a bandwidth of 1,000 Mbps
(megabits per second). An Internet connection via cable
modem may provide 25 Mbps of bandwidth
(SEE modem)
BIOS
1. basic input output system
Bitmap
1. map of dots, or bits, that look like a picture as long
as you are sitting a reasonable distance from the
screen
2. a graphic file format with the file extensions of
*.bmp or *.dib (SEE File format)
Browser
1. software program that allows a person to explore
the Internet in an easy-to-use way
EXAMPLES: FireFox, Safari, Internet Explorer, Chrome,
Opera
Bugs
1. errors made by computer programmers when
developing a program
Byte
1. data measurement
Cloaking
1. the technique of hiding something or giving a false
appearance
2. method by which most malware infects a computer
(SEE malware)
EXAMPLE: malware disguises itself as an antivirus
program when in reality it is a virus
Cloud Computing
1. services over a network by a collection of servers
(SEE server)
2. service that allows visiting users to access programs
and services anywhere with Internet access without
having to install other software
EXAMPLES: Amazon Web Services, Google Docs, Google
Calendar, online backup services (cloud storage), Dropbox,
Mozy
Compression
1. the process of taking one or more files and
shrinking the overall size, making them into smaller
files, to enable easier downloading and sharing
EXAMPLE: Zip file
CPU
1. central processing unit; also known as processor or
microprocessor
2. computer “brain” that processes data
Debug
1. process of taking a deep look into an issue with a
program and removing errors that are found
Driver
1. group of files that enable one or more hardware
devices to communicate with the computer’s
operating system
2. software that allows computer hardware, such as
printers, to work with the operating system
DSL
1. Digital Subscriber Line
2. means of transferring data over regular phone lines
and can be used to connect to the Internet
Emoticon
1. text-based faces and objects that are often seen in
emails and online chat that help give the reader a
sense of the writer’s feelings behind the text
EXAMPLES:
: ) Happy,
: p Sticking Tongue Out,
@--->--->-- Long Stem Rose,
-_- Annoyed
E-reader
1. also known as an E-book
2. portable hardware device designed for reading
digital publications
EXAMPLE: Amazon Kindle
Ethernet
1. most common type of connection computers use in
a local area network (SEE LAN)
Ethernet Port
1. a computer port resembling a regular telephone
jack, but slightly wider, used to connect a computer
to another computer, a local network, or an
external DSL or cable modem (SEE modem)
Export
1. process of taking data from one program or
computer to another
External Hard Drive
1. hard drives that come as large in size as a book or
as small as a cell phone, used to back up data from
a user’s computer and taking it on the road
2. expands the total amount of space available to a
user
Fiber-Optic Cable
1. fragile cables, usually placed underground,
made up of super-thin filaments of glass or other
transparent materials that can carry beams of light
2. enables data to be sent at the speed of light
File format
1. A standard way that information is encoded for
storage in a computer file. Each file type has a
different file format
EXAMPLES: common file formats include BMP, JPEG, GIF,
PICT, PCX, TIFF
Firewall
1. software utility or hardware device that limits
outside network access to a computer or local
network by blocking or restricting ports
2. helps prevent unauthorized access to a company or
home network
Thank you.

Sabtu, 19 Januari 2019

Computer software


Computer software, or just software, is a collection

of computer programs and related data that provides the instructions for telling a computer what to do and
how to do it.

• Any set of instructions that guides the hardware
and tells it how to accomplish each task.

System software
• System software is computer software designed to
operate the computer hardware to provide basic
functionality and to provide a platform for running
application software.

• Refers to the operating system and all utility
programs that manage computer resources at a low
level.

• The BIOS (basic input/output system) gets the
computer system started after you turn it on and
manages the data flow between the operating
system and attached devices such as the hard disk,
video adapter, keyboard, mouse, and printer.

• The boot program loads the operating system into
the computer's main memory or random access
memory (RAM).

• System software also includes system utilities, such
as the disk defragmenter and System Restore.
Programming Software

• Programming software include tools in the form of
programs or applications that software developers
use to create, debug, maintain, or otherwise
support other programs and applications.

• The term usually refers to relatively simple programs
such as compilers, debuggers, interpreters,
linkers, and text editors,


• Example of programming language:
– C
– C++
– C#
– BASIC
– JAVA
– Visual Basic
– Phyton
– HTML
– PHP
Application Software

• A program or group of programs designed for end
users

• Allows end users to accomplish one or more specific
(non-computer related) tasks.
Examples of Computer Application Software
• Word processor
• Spreedsheet
• Presentation Software
• Database Management System
• Dekstop Publisher
• Graphic Editor
• Web Browser

Thank you

History of robotics timeline



This history of robotics is intertwined with the histories of technology, science and the
basic principle of progress. Technology used in computing, electricity, even pneumatics
and hydraulics can all be considered a part of the history of robotics. The timeline
presented is therefore far from complete.
Robotics currently represents one of mankind’s greatest accomplishments and is the
single greatest attempt of mankind to produce an artificial, sentient being. It is only in
recent years that manufacturers are making robotics increasingly available and attainable
to the general public.
The focus of this timeline is to provide the reader with a general overview of robotics
(with a focus more on mobile robots) and to give an appreciation for the inventors and
innovators in this field who have helped robotics to become what it is today.
Greek Times
Some historians affirm that Talos, a giant creature written about in ancient
greek literature, was a creature (either a man or a bull) made of bronze, given
by Zeus to Europa. [6]
According to one version of the myths he was created in
Sardinia by Hephaestus on Zeus' command, who gave him to the Cretan king
Minos. In another version Talos came to Crete with Zeus to watch over his
love Europa, and Minos received him as a gift from her. There are
suppositions that his name Talos in the old Cretan language meant the "Sun"
and that Zeus was known in Crete by the similar name of Zeus Tallaios. Since
Talos was a bronze man, his blood was lead, which they believed was a divine
fluid (ichor), identical to that what runs in the veins of the gods. Talos' single
vein was leading from his neck through his body to one of his heels, which was
closed by a bronze nail or a bronze peg or a pin. [13]
~77-100BC
In 1901, between the islands of Crete and Kythera, a diver found the remnants
of what might only be considered a mechanical computer. The device is a
complex mix of gears which most likely calculated the position of the sun,
moon or other celestial bodies.[7] The device dates back 2000 years and is
considered to be of Greek origin and was given the name “The Antikythera
Device”.
~270BC
An ancient Greek engineer named Ctesibus made organs and water clocks
with movable figures. [2]
The concept for his clock was fairly simple; a reservoir
with a precise hole in the bottom would take 24 hours to empty its contents.
The container was marked into 24 divisions.
278 – 212BC
Archimedes (287-212BC) did not invent robots, but he did invent many
mechanical systems that are used in robotics today, as well as advancing the
field of mathematics.
10-70AD
The Hero of Alexandria, a Mathematician, Physicist and Engineer (10-70AD)
wrote a book titled Automata (Arabic translation, or in Greek “moving itself”)
which is a collection of different devices which could have been used in
temples. The Hero of Alexandria designed an odometer to be mounted on a
cart and measure distances traveled. Among his other inventions are a wind-
powered organ, animated statues and the Aeolipile. Although conceived
simply as a trinket, the Aeolipile can be considered the forefather of modern
steam engines. [8]
Medieval times
Automatons, human-like figures run by hidden mechanisms, were used to
impress peasant worshippers in church into believing in a higher power.
[These mechanisms] created the illusion of self-motion (moving without
assistance). The clock jack was a mechanical figure that could strike time on a
bell with its axe. This technology was virtually unheard of in the 13th
century. [1]
1495
Leonardo da Vinci designed what may be the first humanoid robot though it
cannot be confirmed if the design was actually ever produced. The robot was
designed to sit up, wave its arms, and move its head via a flexible neck while
opening and closing its jaw. [4]
1645
Blaise Pascal invented a calculating machine to help his father with taxes. The
device was called the Pascaline [9]
and about 50 Pascalines were built. Only a
few can be found in museums such as the one on display in the Des Arts et
Metiers Museum in Paris.
1666
A pocket version of the Pascaline was invented by Samuel Morland [9] which
worked “without charging the memory, disturbing the mind, or exposing the
operations to any uncertainty” [14]
18th Century
In the 18th century, miniature automatons became popular as toys for the
very rich. They were made to look and move like humans or small animals.[1]
1709
Jacques de Vaucanson’s most famous creation was undoubtedly "The Duck."
This mechanical device could flap its wings, eat, and digest grain. Each wing
contained over four hundred moving parts and even today it remains
something of a mystery. The original Duck has disappeared. [10]
1801
Joseph-Marie Jacquard invented a machine (essentially a loom) that could be
programmed to create designs that could be printed onto cloth or tissue.
1865
John Brainerd created the Steam Man apparently used to pull wheeled carts
and more. [4]
In 1885, Frank Reade Jr. built the “Electric Man” which is more-
or-less an electric version of the Steam Man. [4]
1903
The first patents were awarded for the construction of a “printed wire” which
came into use after World War 2. The concept was to replace radio tube with
something less bulky. [18]
1921
The term "robot" was first used in a play called "R.U.R." or "Rossum's
Universal Robots" by the Czech writer Karel Capek. The plot was simple: man
creates a robot to replace him and then robot kills man! [2]
1937-1938
Westinghouse creates ELEKTRO a human-like robot that could walk, talk,
and smoke [4]
. ELEKTRO was first unveiled at the 1939 world’s fair.
Thank you.

Jumat, 18 Januari 2019

The Post Office Protocol




When the first versions of SMTP were designed, the Internet was composed of minicomputers that were used by
an entire university department or research lab. These minicomputers were used by many users at the same time.
Email was mainly used to send messages from a user on a given host to another user on a remote host. At that
time, SMTP was the only protocol involved in the delivery of the emails as all hosts attached to the network were
running an SMTP server. On such hosts, an email destined to local users was delivered by placing the email in a
special directory or file owned by the user. However, the introduction of personal computers in the 1980s, changed
this environment. Initially, users of these personal computers used applications such as telnet to open a remote
session on the local minicomputer to read their email. This was not user-friendly. A better solution appeared
with the development of user friendly email client applications on personal computers. Several protocols were
designed to allow these client applications to retrieve the email messages destined to a user from his/her server.
Two of these protocols became popular and are still used today. The Post Office Protocol (POP), defined in RFC
1939, is the simplest one. It allows a client to download all the messages destined to a given user from his/her
email server. We describe POP briefly in this section. The second protocol is the Internet Message Access Protocol
(IMAP), defined in RFC 3501. IMAP is more powerful, but also more complex than POP. IMAP was designed to
allow client applications to efficiently access in real-time to messages stored in various folders on servers. IMAP
assumes that all the messages of a given user are stored on a server and provides the functions that are necessary
to search, download, delete or filter messages.
POP is another example of a simple line-based protocol. POP runs above the bytestream service. A POP server
usually listens to port 110. A POP session is composed of three parts : an authorisation phase during which
the server verifies the client’s credential, a transaction phase during which the client downloads messages and an
update phase that concludes the session. The client sends commands and the server replies are prefixed by +OK
to indicate a successful command or by -ERR to indicate errors.
When a client opens a transport connection with the POP server, the latter sends as banner an ASCII-line starting
with +OK. The POP session is at that time in the authorisation phase. In this phase, the client can send its
username (resp. password) with the USER (resp. PASS) command. The server replies with +OK if the username
(resp. password) is valid and -ERR otherwise.
Once the username and password have been validated, the POP session enters in the transaction phase. In this
phase, the client can issue several commands. The STAT command is used to retrieve the status of the server.
Upon reception of this command, the server replies with a line that contains +OK followed by the number of
messages in the mailbox and the total size of the mailbox in bytes. The RETR command, followed by a space and
an integer, is used to retrieve the nth message of the mailbox. The DELE command is used to mark for deletion
the nth message of the mailbox.
Once the client has retrieved and possibly deleted the emails contained in the mailbox, it must issue the QUIT
command. This command terminates the POP session and allows the server to delete all the messages that have
been marked for deletion by using the DELE command.
The figure below provides a simple POP session. All lines prefixed with C: (resp. S:) are sent by the client (resp.
server).
S: +OK POP3 server ready
C: USER alice
S: +OK
C PASS 12345pass
S: +OK alice's maildrop has 2 messages (620 octets)
C: STAT
S: +OK 2 620
C: LIST
S: +OK 2 messages (620 octets)
S: 1 120
S: 2 500
S: .
C: RETR 1
S: +OK 120 octets
S: <the POP3 server sends message 1>
S: .
C: DELE 1
S: +OK message 1 deleted
C: QUIT
S: +OK POP3 server signing off (1 message left)
In this example, a POP client contacts a POP server on behalf of the user named alice. Note that in this example,
Alice’s password is sent in clear by the client. This implies that if someone is able to capture the packets sent by
Alice, he will know Alice’s password 6
. Then Alice’s client issues the STAT command to know the number of
messages that are stored in her mailbox. It then retrieves and deletes the first message of the mailbox.
Thank you for visit my blogs and see you later.

The Simple Mail Transfer Protocol



The Simple Mail Transfer Protocol (SMTP) defined in RFC 5321 is a client-server protocol. The SMTP specifi-
cation distinguishes between five types of processes involved in the delivery of email messages. Email messages
are composed on a Mail User Agent (MUA). The MUA is usually either an email client or a webmail. The MUA
sends the email message to a Mail Submission Agent (MSA). The MSA processes the received email and forwards
it to the Mail Transmission Agent (MTA). The MTA is responsible for the transmission of the email, directly or
via intermediate MTAs to the MTA of the destination domain. This destination MTA will then forward the mes-
sage to the Mail Delivery Agent (MDA) where it will be accessed by the recipient’s MUA. SMTP is used for the
interactions between MUA and MSA 3
, MSA-MTA and MTA-MTA.
SMTP is a text-based protocol like many other application-layer protocols on the Internet. It relies on the byte-
stream service. Servers listen on port 25. Clients send commands that are each composed of one line of ASCII
text terminated by CR+LF. Servers reply by sending ASCII lines that contain a three digit numerical error/success
code and optional comments.
The SMTP protocol, like most text-based protocols, is specified as a BNF. The full BNF is defined in RFC 5321.
In this BNF, atext corresponds to printable ASCII characters. This BNF rule is defined in RFC 5322. The five
main commands are EHLO, MAIL FROM:, RCPT TO:, DATA and QUIT 4
. Postmaster is the alias of the system
administrator who is responsible for a given domain or SMTP server. All domains must have a Postmaster alias.
SMTP servers use structured reply codes containing three digits and an optional comment. The first digit of
the reply code indicates whether the command was successful or not. A reply code of 2xy indicates that the
command has been accepted. A reply code of 3xy indicates that the command has been accepted, but additional
information from the client is expected. A reply code of 4xy indicates a transient negative reply. This means that
for some reason, which is indicated by either the other digits or the comment, the command cannot be processed
immediately, but there is some hope that the problem will only be transient. This is basically telling the client to
try the same command again later. In contrast, a reply code of 5xy indicates a permanent failure or error. In this
case, it is useless for the client to retry the same command later. Other application layer protocols such as FTP
RFC 959 or HTTP RFC 2616 use a similar structure for their reply codes. Additional details about the other reply
codes may be found in RFC 5321.
The first four reply codes correspond to errors in the commands sent by the client. The fourth reply code would
be sent by the server when the client sends commands in an incorrect order (e.g. the client tries to send an email
before providing the destination address of the message). Reply code 220 is used by the server as the first message
when it agrees to interact with the client. Reply code 221 is sent by the server before closing the underlying
transport connection. Reply code 421 is returned when there is a problem (e.g. lack of memory/disk resources)
that prevents the server from accepting the transport connection. Reply code 250 is the standard positive reply that
indicates the success of the previous command. Reply codes 450 and 452 indicate that the destination mailbox
is temporarily unavailable, for various reasons, while reply code 550 indicates that the mailbox does not exist or
cannot be used for policy reasons. Reply code 354 indicates that the client can start transmitting its email message.
The transfer of an email message is performed in three phases. During the first phase, the client opens a transport
connection with the server. Once the connection has been established, the client and the server exchange greetings
messages (EHLO command). Most servers insist on receiving valid greeting messages and some of them drop the
underlying transport connection if they do not receive a valid greeting. Once the greetings have been exchanged,
the email transfer phase can start. During this phase, the client transfers one or more email messages by indicating
the email address of the sender (MAIL FROM: command), the email address of the recipient (RCPT TO: command)
followed by the headers and the body of the email message (DATA command). Once the client has finished sending
all its queued email messages to the SMTP server, it terminates the SMTP association (QUIT command).
the MTA running on mta.example.org opens a TCP connection to the SMTP server on host
smtp.example.com. The lines prefixed with S: (resp. C:) are the responses sent by the server (resp. the commands
sent by the client). The server sends its greetings as soon as the TCP connection has been established. The client
then sends the EHLO command with its fully qualified domain name. The server replies with reply-code 250 and
sends its greetings. The SMTP association can now be used to exchange an email.
To send an email, the client must first provide the address of the recipient with RCPT TO:. Then it uses the MAIL
FROM: with the address of the sender. Both the recipient and the sender are accepted by the server. The client
can now issue the DATA command to start the transfer of the email message. After having received the 354 reply
code, the client sends the headers and the body of its email message. The client indicates the end of the message
by sending a line containing only the . (dot) character 5
. The server confirms that the email message has been
queued for delivery or transmission with a reply code of 250. The client issues the QUIT command to close the
session and the server confirms with reply-code 221, before closing the TCP connection.
Note: Open SMTP relays and spam
Since its creation in 1971, email has been a very useful tool that is used by many users to exchange lots of
information. In the early days, all SMTP servers were open and anyone could use them to forward emails towards
their final destination. Unfortunately, over the years, some unscrupulous users have found ways to use email for
marketing purposes or to send malware. The first documented abuse of email for marketing purposes occurred in
1978 when a marketer who worked for a computer vendor sent a marketing email to many ARPANET users. At
that time, the ARPANET could only be used for research purposes and this was an abuse of the acceptable use
policy. Unfortunately, given the extremely low cost of sending emails, the problem of unsolicited emails has not
stopped. Unsolicited emails are now called spam and a study carried out by ENISA in 2009 reveals that 95% of
email was spam and this number seems to continue to grow. This places a burden on the email infrastructure of
Internet Service Providers and large companies that need to process many useless messages.
Given the amount of spam messages, SMTP servers are no longer open RFC 5068. Several extensions to SMTP
have been developed in recent years to deal with this problem. For example, the SMTP authentication scheme
defined in RFC 4954 can be used by an SMTP server to authenticate a client. Several techniques have also been
proposed to allow SMTP servers to authenticate the messages sent by their users RFC 4870 RFC 4871 .
Thank you for visit my blogs and see you later

Kamis, 17 Januari 2019

History of Java




The story of Java can be traced to early 1991 when a team of engineers led
by James Gosling, at Sun Microsystems was formed to explore opportunities
in the consumer electronics market. This effort was eventually referred to as
the “Green” project. The aim of the project was to build a distributed system
that would allow consumer electronic devices to talk to each other in a
heterogeneous network as a business product that they can sell as modern
software technology to consumer electronics’ manufacturers.
The engineers of the Green project started with C++ as their choice of
language. However, in order to accommodate the consumer market’s
demand for CPU flexibility, they wanted to make the development a more
platform-neutral process, and this required extending the C++ compiler.
Eventually, however, they realized that even with lots of extras, C++ would
not suffice, not to mention that C++ is a complex language in its own and
current form. This has lead to the development of a new programming
language – Oak – named after a tree that James Gosling could see from his
office window. A key commercial use of Oak was to be the programming
language for interactive cable TV control devices and electronic home
management systems. After months of hacking on Oak, the Green team
produced an operating system, a toolkit, and interface, a new hardware
platform, three custom chips, and they delivered a PDA-like device called
“*7” that Gosling calls a “handheld remote control”.
In 1993, the Green team (incorporated as FirstPerson Inc.) got a request for a
proposal for a set-top box operating system and video-on-demand
technology. FirstPerson placed a pid, but despite being told that they have
the best technology, they did not win the pid (SGI did) due to what Gosling
characterizes as wholly non-technical reasons, such as business politics.
FirstPerson kept trying to pursue set-top boxes until 1994, when it concluded
that the market was not real. FirstPerson dissolved and about half of its staff
moved to Sun Interactive to digital video data servers.
By mid-1994, the Internet in general and the World Wide Web (WWW) in
particular exploded into widespread use. The Green team decided on
adapting the Oak language to the needs of the Internet and provide an
Internet programming language for WWW-based applications. The decision
was made because Oak included many features that were relevant to the
WWW environment, including the idea of being architecturally neutral and
platform independent (meaning that the same program can run on a wide
variety of platforms).
In January 1995, Oak was renamed Java (as the name Oak was already in
use), and developed into a robust programming language for building
WWW-based applications. As a proof-of-concept, they developed a web-
browser known as HotJava (written in Java) that is capable of running mini
Java applications (known as Applets) that are embedded in WWW pages.
This feature of HotJava was then taken up by Netscape and Microsoft. Later
in 1995 Sun released the initial Java Development Kit (JDK) and HotJava.
From then on Java has become increasingly popular.
Thank you for visit my blogs and see you later.

History of Python




The history of the Python programming language dates back to the late 1980s [1, 27]. Python was
conceived in the late 1980s and its implementation was started in December 1989 by Guido van Rossum at
CWI in the Netherlands as a successor to the ABC programming language capable of exception handling and
interfacing with the Amoeba operating system. Van Rossum is Python's principal author, and his continuing
central role in deciding the direction of Python is reflected in the title given to him by the Python
community. Python is a widely used general-purpose, high-level programming language. Its design
philosophy emphasizes code readability, and its syntax allows programmers to express concepts in fewer
lines of code than would be possible in languages such as C++ or Java. The language provides constructs
intended to enable clear programs on both a small and large scale.
Python supports multiple programming paradigms, including object-oriented, imperative and
functional programming or procedural styles. It features a dynamic type system and automatic memory
management and has a large and comprehensive standard library. Python interpreters are available for
installation on many operating systems, allowing Python code execution on a wide variety of systems.
Python is a multi-paradigm programming language: object-oriented programming and structured
programming are fully supported, and there are a number of language features which support functional
programming and aspect-oriented programming. Many other paradigms are supported using extensions,
including design by contract and logic programming. Python uses dynamic typing and a combination of
reference counting and a cycle-detecting garbage collector for memory management. An important feature of
Python is dynamic name resolution (late binding), which binds method and variable names during program
execution. The design of Python offers some support for functional programming in the Lisp tradition. The
language has map, reduce and filter functions; comprehensions for lists, dictionaries, and sets; and generator
expressions [2, 91]. The standard library has two modules itertools and functools. Also, Python has
significant advantages over the various programming languages, for example:
 clean syntax (for allocation of blocks to use derogations);
 tolerance programs (that is characteristic of most interpreted languages);
 normal distribution has a lot of useful modules (including the module for developing GUI);
 the use Python in interactive mode (very useful for experimentation and solve simple problems);
 normal distribution is simple but at the same time quite powerful development environment, which is
called IDLE and what is written in Python;
 suitable for solving mathematical problems (a means of working with complex numbers, can operate
with integers of arbitrary size, a dialog can be used as a powerful calculator).
However, Python still has some disadvantages. Python like many other interpreted languages that do
not apply, for example, JIT-compilers have a common drawback - the relatively low rate of program
implementation. In addition, the lack of static typing and some other reasons do not allow you to implement
a Python function overloading mechanism at compile time.
Python has a large standard library, commonly cited as one of Python's greatest strengths [3, 178],
providing tools suited to many tasks. This is deliberate and has been described as a "batteries included"
Python philosophy. For Internet-facing applications, a large number of standard formats and protocols (such
as MIME and HTTP) are supported. Modules for creating graphical user interfaces, connecting to relational
databases, pseudorandom number generators, arithmetic with arbitrary precision decimals, manipulating
regular expressions and doing unit testing are also included. Some parts of the standard library are covered
by specifications, but the majority of the modules are not. They are specified by their code, internal
documentation, and test suite (if supplied). However, because most of the standard library is cross-platform
Python code, there are only a few modules that must be altered or completely rewritten by alternative
implementations. The primary mechanism for proposing major new features, for collecting community input
on an issue and for documenting the design decisions that have gone into Python.
Enhancement of the language goes along with development of the CPython reference
implementation. The mailing list python-dev is the primary forum for discussion about the language's
development; specific issues are discussed in the Roundup bug tracker maintained at python.org.
Development takes place on a self-hosted source code repository running Mercurial. A number of alpha,
beta, and release-candidates are also released as previews and for testing before the final release is made.
Although there is a rough schedule for each release, this is often pushed back if the code is not ready. The
development team monitor the state of the code by running the large unit test suite during development, and
using the BuildBot continuous integration system. The community of Python developers has also contributed
over 72,000 software modules (as of January 2016) to the Python Package Index (called PyPI), the official
repository of third-party libraries for Python. The major academic conference on Python is named PyCon.
There are special mentoring programs like the Pyladies.
Python's name is derived from the television series Monty Python's Flying Circus, and it is common
to use Monty Python references in example code [4, 161]. For example, the metasyntactic variables often
used in Python literature are spam and eggs, instead of the traditional foo and bar. As well as this, the official
Python documentation often contains various obscure Monty Python references. Since 2003, Python has
consistently ranked in the top ten most popular programming languages as measured by the TIOBE
Programming Community Index. As of January 2016, it is in the fifth position. It was ranked as
Programming Language of the Year for the year 2007 and 2010. It is the third most popular language whose
grammatical syntax is not predominantly based on C.
Python - stable and common language. It is used in many projects and in various ways: as a basic
programming language or to create extensions and application integration. In Python implemented a large
number of projects, it is also widely used for prototyping of future programs. Python is widely used in many
large companies.
Thank you for visit my blogs and see you later.

Rabu, 16 Januari 2019

Using the Internet to Communicate




The internet isn't just about finding information. It's also about connecting with friends, family, and people you've
never met before. Today, there are many different ways to communicate online, including social networking,
chat, VoIP, and blogging.
1.Social Networking
Social networking has become one of the main ways
people keep in touch. Below are a few of the most
popular social networking sites:
v Facebook is used by about one billion
people. If you have family or friends that live far
away, you can use Facebook to keep up with
their lives. You can also share things you've
found online that interest you.
v Twitter lets you share brief messages (or
"tweets") with the entire world, or with just your
circle of friends. By following people with similar
interests, you can discover new things that you
wouldn't have found otherwise.
v LinkedIn is a site that you can use for
business networking. It allows you to connect
with other people in your field and find out about
new job opportunities.
2.Chat and Instant Messaging
Chat and instant messaging programs allow you to have conversations with your friends or just write them a
quick note. Two examples are Yahoo! Messenger and Microsoft Messenger. Some sites, such as Gmail and
Facebook, allow you to chat within your browser.
3.VoIP
VoIP (Voice over Internet Protocol), allows you to have telephone service through your internet connection.
Some services also let you do video conferencing, such as Skype and Facebook Video Calling. Many of
these services are free or very inexpensive, and some people use them as a replacement for a landline, or just to
save minutes on their mobile phones.
4.Blogs
Today, the average user has the ability to shape the web by adding to it. If you have knowledge or interests that
you're passionate about, you can create your own blog and share your thoughts with the world.
There are many sites like blogger.com and wordpress.com that let you create a blog for free. You don't need any
web design experience— most of the technical stuff has already been created for you, and you can choose a pre-
designed template that has the look and feel that you want.
Thank you very much for visit my blogs , and see you on next blogs.

Connecting Two Hosts




Thr first step when building a network, even a worldwide network such as the Internet, is to connect two hosts
together.
To enable the two hosts to exchange information, they need to be linked together by some kind of physical media.
Computer networks have used various types of physical media to exchange information, notably :
1.electrical cable
Information can be transmitted over different types of electrical cables. The most common
ones are the twisted pairs (that are used in the telephone network, but also in enterprise networks) and the
coaxial cables (that are still used in cable TV networks, but are no longer used in enterprise networks).
Some networking technologies operate over the classical electrical cable.
2. optical fiber
Optical fibers are frequently used in public and enterprise networks when the distance be-
tween the communication devices is larger than one kilometer. There are two main types of optical fibers
: multimode and monomode. Multimode is much cheaper than monomode fiber because a LED can be
used to send a signal over a multimode fiber while a monomode fiber must be driven by a laser. Due to the
different modes of propagation of light, monomode fibers are limited to distances of a few kilometers while
multimode fibers can be used over distances greater than several tens of kilometers. In both cases, repeaters
can be used to regenerate the optical signal at one endpoint of a fiber to send it over another fiber.
3.wireless
In this case, a radio signal is used to encode the information exchanged between the communi-
cating devices. Many types of modulation techniques are used to send information over a wireless channel
and there is lot of innovation in this field with new techniques appearing every year. While most wireless
networks rely on radio signals, some use a laser that sends light pulses to a remote detector. These optical
techniques allow to create point-to-point links while radio-based techniques, depending on the directionality
of the antennas, can be used to build networks containing devices spread over a small geographical area.
thank  you for visit my blog and see you later.

Selasa, 15 Januari 2019

Hardware Needed to connect to the internet.



1.Modem
Once you have your computer, you really don't need much additional hardware
to connect to the internet. The primary piece of hardware you need is a
modem.
The type of internet access you choose will determine what type of modem you
need. Dial-up access uses a telephone modem, DSL service uses a DSL
modem, cable access uses a cable modem, and satellite service uses a
satellite adapter. Your ISP may give you a modem (often for a fee) when you
sign a contract with them, which helps to ensure that you have the right kind of
modem. However, if you would prefer to shop for a better or cheaper modem,
then you can choose to buy one separately.
2.Router
A router is a hardware device that allows you to connect several
computers and other devices to a single internet connection, which is
known as a home network. Many routers are wireless, allowing you to
easily create a wireless network.
You don't necessarily need to buy a router to connect to the internet.
It's possible to connect your computer directly to your modem using an
Ethernet cable. Also, many modems now include a built-in router, so
you have the option of creating a network without having to buy more
hardware.
Most routers also act as a hardware firewall, which helps prevent
people from gaining access to your computer through the internet.
3.Network Card
A network card is a piece of hardware that allows computers to
communicate over a computer network. Most newer computers have a
network card built into the motherboard, so it probably is not something
you will need to purchase. The network card will either have an
Ethernet port, a wireless connection, or both.
If you have a laptop with a wireless connection, you can access the
internet at any place that offers a Wi-Fi connection. Many restaurants,
coffee shops, bookstores, hotels and other businesses offer free
Wi-Fi. In addition, many cities provide free Wi-Fi in public areas such
as parks and downtown areas.
4.Web Browsers
A web browser is the tool that you use to access the
World Wide W eb. The browser's main job is to
display web pages. It also lets you create
Bookmarks (sometimes called Favorites) for sites
you like, so that you can easily find them again later.
The World Wide Web is a virtual network of web
sites connected by hyperlinks (or "links"). Web
sites are stored on servers on the internet, so the
World Wide Web is a part of the internet.
Your computer probably came with a browser pre-
installed. PCs come with Internet Explorer, and Macs
come with Safari. If you prefer to use a different
browser, you can download Firefox, Google Chrome,
or Opera. All of these browsers are free.
5.Setting Up Your Internet Connection
Once you have chosen an ISP and purchased the appropriate modem, you can use the instructions provided by
your ISP (or included with the modem) to set up your internet connection. Depending on what type of service you
have, your ISP may need to send a technician to your house in order to turn the connection on.
After you have everything set up, you can open your web browser and begin using the internet. If you have any
problems with your internet connection, you can call your ISP's tech support number.
6.Internet on Mobile Devices
With tablet computers and mobile phones, it's possible to have full internet access,
allowing you to check your e-mail and browse the Web away from home. To do
this, you'll need a data plan, which adds an additional monthly fee to your mobile
phone bill. Data plans are also available for laptops and e-readers such as the
Kindle.
Just like regular cell phone service, it's important to choose a provider that has good
coverage in your area. You may want to ask your friends, family, or coworkers
which provider they use.
With some devices, such as the iPad, you can choose not to buy a data plan, and
you'll still be able to access the internet whenever you are connected to a Wi-Fi
network. If you set up a home wireless network, your device can automatically
connect to it whenever you're at home. Also, many restaurants, libraries, and
downtown areas offer free Wi-Fi.
Mobile data plans are often referred to as 3G, which means it's the third generation of wireless standards.
Many companies now provide 4G (fourth generation) data services, which allow you to have broadband
speeds on your mobile device.

Thank you.

History,Architecture and Distribution of Linux



1.History
In the early sixties, AT&T Bell Labs was developing a computer operating system called
UNIX. This operating system was licensed to many higher institutions of education as a teaching OS.
One of these universities was the University of Helsinki, in Finland. There a young student, Linus
Torvalds was working on this licensed version of UNIX, branded Minux. Linus re­implemented all the
different system calls of Minux and decided to release his work into the public eye. Linus named his
new version Linux.
Linux was licensed under the GNU Public License, which allows for free modification of the
source­code of the Linux kernel. The GNU Public License, or GPL was developed by a project called
GNU, started by one Richard Stallman. The goal of the GNU project was to develop a UNIX
derivative, however the GNU project started by building all the tools, whereas Torvalds started by
building the kernel.
2.Architecture
UNIX, and therefore Linux, was built upon a small set of core principles. Those include:
● Small single purpose commands
● Strictly simple output from said commands
● Loosely accepted varied input for said commands
● EVERYTHING is a file ( a consistent interface )
● All configuration stored in ASCII
These core principles, as well as being written in C led to UNIX being a very easy to maintain, easy to
update, and easy to port operating system. An added benefit was the greater ease for universities to use
the UNIX source­code as a teaching tool.
The Linux architecture is comprised of three distinct layers. Those are:
● Hardware
● Kernel­space
● User­space
The basic level is the hardware. A Linux Kernel is compiled into the appropriate machine code for
whichever processor architecture the machine is running on. The kernel then creates a consistent
kernel­level interface to all the different pieces of hardware as well as taking care of managing
processes, security, and other “operating system” tasks. All other software runs in “User­space” which
includes all shells, programs, GUIs etc. The main suite of tools developed by the GNU project are
known as the GNU­Utilities. When you speak about Linux in the common sense you are actually
talking about the GNU­Utilities running on top of the Linux kernel.
3.Distributions or One Brand Doesn't Fit All
Originally,
 installing Linux was a very belabored process. You had to have an already­installed
operating system, usually Minux, then you compiled all the GNU tools, then compiled your Linux
kernel. Needless to say Linux was mostly for hobbyists. Distributions solved that problem by providing
a simple installer, a package (software) management tool and other perks. Some distributions of note
include:
SLS
The first distro.  Not very notable other than for that simple fact.
Slackware
The first distro to have a package management tool – simple tarballs with precompiled
software. Still in use today.
RedHat
First commercial distro. Now branched into the community version, Fedora Core, and the
commercially supported version, RedHat Enterprise Linux. Most popular distro in commercial
applications domestically.
SUSE
Another commercial distro. Similarly split into the community version and the commercial
version. Most popular distro worldwide.
Debian
A distro “by the people, for the people and of the people”. Very stable, not commercially
supported. Very adherent to the Free Software Foundation's standards.
Ubuntu
A distro based on Debian which IS commercially supported. Probably the most popular for
hobbyists today, and is rapidly gaining ground.

Thank you for visit my blogs.

Senin, 14 Januari 2019

Computer Hardware part 1


1.Power Supply:
The power supply converts the alternating current (AC) from your mains (110V
input or 220V input) to the direct current (DC) needed by the computer 2
. In a PC,
the power supply is the metal box usually found in a corner of the case. The power
supply is visible from the back of many systems because it contains the power-cord
receptacle and the cooling fan. Power supplies - often referred to as switching power
supplies, use switcher technology to convert the AC input to lower DC voltages.
2.Heat Sinks/Fans:
As processors, graphics cards, RAM and other components in computers have
increased in speed and power consumption, the amount of heat produced by these
components as a side-effect of normal operation has also increased. These
components need to be kept within a specified temperature range to prevent
overheating, instability, malfunction and damage leading to a shortened component
lifespan. Other devices which need to be cooled include the power supply unit,
optoelectronic devices such as higher-power lasers and light emitting diodes (LEDs)
and hard disks.
A heat sink is a heat exchanger component attached to a device used for
passive cooling. It is designed to increase the surface area in contact with the cooling
fluid surrounding it, such as the air thus allowing it to remove more heat per unit time.
Other factors which improve the thermal performance of a heat sink are the approach
air velocity, choice of material – usually an aluminum alloy due to its high thermal
conductivity values (229 W/mºK), fin (or other protrusion) design and surface
treatment.
The approach air velocity depends on the attached or nearby fan. When there
is no air flow around the heat sink, energy cannot be transferred. A computer fan is
any fan inside, or attached to, a computer case used for active cooling, and may refer
to fans that draw cooler air into the case from the outside, expel warm air from inside,
or move air across a heat sink to cool a particular component.
3.Case:
A computer case (also known as a computer chassis, cabinet, box, tower, enclosure,
housing, system unit or simply case) is the enclosure that contains most of the
components of a computer (usually excluding the display, keyboard and mouse). If
you are building your own computer selecting the case will be one of your first
choices to make: the type of case, its size, orientation, the number of bays you will
need etc.
Sizes
Cases can come in many different sizes (known as form factors). The size and shape
of a computer case is usually determined by the form factor of the motherboard, since
it is the largest component of most computers. Consequently, personal computer form
factors typically specify only the internal dimensions and layout of the case.
For example, a case designed for an ATX motherboard and power supply may
take on several external forms, such as a vertical tower (designed to sit on the floor,
height > width) or a flat desktop (height < width) or pizza box (height ≤ 2 inches,
designed to sit on the desk under the computer's monitor). Full-size tower cases are
typically larger in volume than desktop cases, with more room for drive bays and
expansion slots. Desktop cases—and mini-tower cases designed for the reduced
microATX form factor—are popular in business environments where space is at a
premium.
Major Component Locations:
1. The motherboard is usually screwed to the case along its largest face, which could
be the bottom or the side of the case depending on the form factor and orientation.
2. Form factors such as ATX provide a back panel with cut-out holes to expose I/O
ports provided by integrated peripherals, as well as expansion slots which may
optionally expose additional ports provided by expansion cards.
3. The power supply unit is often housed at the top rear of the case; it is usually
attached with four screws to support its weight.
4. Most cases include drive bays on the front of the case; a typical ATX case includes
a 5.25" bay (used mainly for optical drives) and 3.5" bays used for hard drives,
floppy drives, and card readers.
5. Buttons and LEDs are typically located on the front of the case; some cases include
additional I/O ports, temperature and/or processor speed monitors in the same area.
6. Vents are often found on the front, back, and sometimes on the side of the case to
allow cooling fans to be mounted via surrounding threaded screw holes
4.Motherboard:
The motherboard is the key circuit board holding the essential processing parts of a
computer. It allows all the parts of your computer to receive power and
communicate with one another. It is usually screwed to the case along its largest
face, which could be the bottom or the side of the case depending on the form factor
and orientation. The form factor describes the shape and layout of the motherboard.
It affects where individual components go and the shape of the computer's case.
Attached directly to the motherboard are the CPU, RAM, expansion cards,
networking, video, and audio components.
ATX (Advanced Technology eXtended) is a motherboard form factor specification
developed by Intel in 1995. A full-size ATX board is 12 × 9.6 in (305 × 244 mm). It
was the first big change in computer case, motherboard, and power supply design in
many years, improving standardization and interchangeability of parts. The
specification defines the key mechanical dimensions, mounting point, I/O panel,
power and connector interfaces between a computer case, a motherboard, and a power
supply. The specification has been revised numerous times since 1995, the most
recent being version 2.3, released in 2007.
Standards: ATX, standards for smaller boards: microATX, FlexATX and mini-ITX.
5.Expansion Cards:
Special expansion cards are one way to add new types of ports to an older computer
or to expand the number of ports on your computer. Like other expansion cards, these
cards clip into an open expansion slot on the motherboard.
6.Video (Graphics) Card:
A dedicated video card (or video adapter) is an expansion card installed inside your
system unit to translate binary data received from the CPU or GPU into the images you
view on your monitor. It is an alternative to the integrated graphics chip.
Modern video cards include ports allowing you to connect to different video equipment;
also they contain their own RAM, called video memory.
Video cards also come with their own processors or GPUs. Calls to the CPU for graphics
processing are redirected to the processor on the video card, significantly speeding up
graphics processing. Updating to a dedicated graphics card offloads work from the CPU
and system RAM, so not only will graphics processing be faster, but the system’s overall
performance will improve.
The video card also controls the number of colors your monitor can display. The number
of bits the video card uses to represent each pixel on the monitor (referred to as the bit
depth) determines the color quality of the image displayed. The more bits available, the
better the color detail of the image.
7.Sound Card
 Sound cards attached to the motherboard and enabled your computer to record
and reproduce sounds.
 Most computers ship with a basic sound card, most often a 3D sound card. 3D
sound is better than stereo sound at convincing the human ear that sound is
omnidirectional, meaning that you can’t tell what direction the sound is
coming from. This tends to produce a fuller, richer sound than stereo sound.
 To set up surround sound on your computer, you need two things: a set of
surround-sound speakers and a sound card that is Dolby Digital compatible.
There are many formats to choose from such as Dolby Digital EX, Dolby
Digital Plus, and Dolby TrueHD.
The ports on the sound card allow you to connect additional audio devices such as
amplified speakers, headphones, microphones etc.
Thank you.