Minggu, 10 Februari 2019

Automotive Maintenance Safety

Chapter 1: Safety Rules &

Automotive Maintenance Safety:
Automobiles are big and heavy with lots of mechanical moving parts. In the right
environment a vehicle can be maintained and repaired safely and effectively. However,
in the wrong environment repairing a vehicle can be dangerous. Follow the tips in this
chapter to stay safe.
Basic Shop Rules:
> Never work alone
> Wear eye protection
> Avoid loose clothing or hair
> Stay clear of moving parts of a running vehicle
>Be aware of hazardous chemicals and keep a flushing station nearby for eyes
and skin (at home this could be a bathroom sink or shower).
> Keep proper clean up materials in case of an accidental spill (see below)
> Dont mix your work space with other cluttering materials such as home storage,
garden tools and other items.
> Never go under a vehicle that is elevated improperly (the jack to change the tire
is NOT sufficient, see more details below)
> Know where the fire extinguisher is and have a planned exit route. The fire
extinguisher should be kept in working order and in a place with easy access.
>Keep an emergency response number handy and posted clearly where others
can see it.
>Keep an emergency kit in your vehicle for roadside emergencies or repairs.
> Consult your vehicle owners manual for specific safety rules regarding your
vehicle
Proper Clothing and Hair:
Always wear safety goggles for eye protection. Vehicle repair involves the use of many
types of fluids which can splatter and eye contact should be avoided.

One of my first bosses didn't have any feeling sensation in his right hand. He couldnt
feel touch or pain in that hand. He was working alone one night and his hand got caught
in the fan belt while the engine was running. He was conscious long enough to get the
engine to stop running with his other hand, but his right was stuck and he couldnt get
out on his own. He eventually lost consciousness and lay there bleeding for three hours
by himself. Bleeding this long could easily have resulted in death. Luckily he only lost
his fingers. While it was his hand and not a piece of clothing that got caught, the same
principle applies. If a piece of clothing or hair gets caught it wont be long before a hand
or face gets dragged in with it.
Do not wear ties or any loose, hanging clothing. Do not let pony tails down or leave any
loose strands of hair. Bundle your hair up if its long. Do not wear necklaces, rings or
other jewelry. Some may remember Mr. T, the Mohawk-bearing muscle man from the
1980s sitcom The A-Team. He often wore about 50 lbs. of jewelry and frequently
worked on motor vehicles. This was a blatant violation of mechanic safety rules. Only a
person who can get thrown out of an airplane, flip a jeep, and come out of machine gun
fire without a scratch can work on engines that way.
Ideally the best clothing for performing automotive maintenance and repairs is a
mechanics jumpsuit. Its durable, comfortable, there are pockets for tools, and there is
nothing loose that can get caught and pulled into moving parts.
Avoid slips, falls and hazardous chemicals:
Hazardous chemicals can include gasoline, oil, coolant, and other vehicle fluids. Avoid
contact with eyes and mouth. If you ever have contact with eyes then flush with cool
water for several minutes. Some car fluids can be acidic, such as battery fluid. If you
ever start to feel burning, then flush with cool water for several minutes. If burning
continues then seek medical attention.
Proper clean up materials include shop rags and -
oil dri, which is simply kitty litter
without the fragrance. When a spill occurs you should spread enough -
oil dri over the
spill to absorb the entire spill. Then sweep it up with a broom and dustpan and throw it
away.

Avoid clutter in your workspace that can act as fall hazards. Keep storage and non-
automotive tools in other areas. Also, clean up tools after youre finished.
Proper Lifting Points:
A motor vehicle is a 4,000+ pound piece of machinery that could fall on top of you.
Never go under a vehicle that is not elevated properly. If the vehicle is elevated properly
then there should not be any problem.
Vehicles should only be lifted at their proper lifting points. The proper lifting points on a
vehicle are the locations on the vehicle where you place the jack to lift the vehicle and
where the jack stands are placed to keep the vehicle elevated. Lifting points are
different on every vehicle. The owners manual will specify where the lifting points are
for your specific vehicle. Often vehicles have lift points marked on the running board or
rocker panel. There are a couple of disastrous events that can happen during an
attempt to raise a vehicle without using the proper lifting points. The weight of the car
pressing down and the jack pressing up can damage the body of the vehicle. Or worse,
the jack could tip or slide while a person is underneath the vehicle.

Any vehicle that has a frame can be lifted by the frame. When the front is lifted the jack
is usually placed under the suspension cross member. When lifting the rear the jack is
placed under the axle if it has a solid axle. If it doesnt have a solid axle then it should
be lifted by the factory recommended lift points.
Vehicles should always be on firm, level ground. If the ground is not level then the car
may roll and tip the jack. A jack or a jack stand can also slip out or fail to hold the
vehicle in an elevated position when the ground is not firm, such as on a dirt road or
when there is ice or snow.
There are different types of jacks and jack stands. A jack is used to raise the vehicle
either by hydraulic pumping or hand cranking. A jack stand is used to keep the vehicle
elevated and has a firm square base. One type of jack that people are most familiar with
is the one that is included with the spare tire kit. This is to be used only for changing the
tire and it is not sufficient for keeping a vehicle elevated when working under the
vehicle. The jack used for changing tires often has a four point rectangular base. This is
not as stable as a square base.

When minor repairs are being performed, such as changing a tire, it is permissible to
raise just one corner of the vehicle, or the front or the rear. The vehicle is first raised
with a jack and then placed on jack stands. (Do not go under the vehicle while it is
elevated by a jack). The vehicle should be equally balanced on the jack stands.
A mechanics shop may have industry jacks or hydraulic lifts. These can be used to
raise the vehicle and keep it elevated. These lifts can raise the entire vehicle at the
same time. When lifting the entire vehicle the center of gravity should be positioned
evenly with the lifting hoist arms. This is evident when the vehicle is raised and all tires
lift off the ground at the same time. Most vehicles are front-heavy due to the engine
block. However, many work trucks are balanced to have the center of gravity in the
middle.

Thank you for visit my blogs.

Share this